Репаки от elchupacabra

Комментариев: 191

1. 1.   Гости

       Автор: adityataurs

      6.09.2023 06:48  

      Великое спасибо
   2. 

        Меценат

       Автор: brosanot

      5.09.2023 20:28  

      По ссылке на uploadrar (полная версия 4.12 Гб) скачивается версия 1.5.4
      1. 

           Главные редакторы

          Автор: LR.Support

         5.09.2023 20:44  

         Правильно всё. Всё собственно как и было ранее.
         Вариант с моделями - это только финальная версия, т.е. 1.5.4
         А наименование поля с линками берётся из шапки темы (у ВСЕХ репаков на сайте), потому там и было 1.5.4 / 1.5.5
         Переделано немного оформление. Раз всё написанное выше было не было для всех понятным.
   3. 

        Постояльцы

       Автор: Dorcom

      24.08.2023 19:40  

       GPU problem

      So I tested version 1.5.2 running a GPU load monitor next to it and it does not utilize the GPU. GPU load is less than 2%. No core temperature rise or fan activity. However the CPU load monitor shows an 80 to 90% load and temperature increase to about 60-70°C despite the app being set to utilize the GPU!
      
      A 4k test image denoising and sharpening takes at least over 5 minutes. Saving about just as long if not longer.
      
      Whereas version 1.4.0, the only one so far to date that fully utilizes GPU, the same image and the same process is done in less than 10 seconds! The GPU load is near 100% and the core temperature rise to 75°C and the Nvidia fans started roaring.
      
      The significant difference is that the version 1.4 installation file size is around 455 MB and takes almost half hour long installation process (depending on your connection speed) as it downloads all the models.
      
      Whereas the other versions including version 1.52 have a installation file size of around 4.3 GB claiming to include all the models install fairly swiftly but do not perform at all.
      
      It is my conclusion that all these hacks with the exception of the version 1.4.0 I have, (which I got from another site) do not actually properly install and/or configure the app.
      
      Lastly, there seem to be also a lot of questions/complaints on the net about the Topaz photo AI not utilizing GPU performance at all.

      
      

       UPDATE

      As my previous post indicated, the none utilizing GPU problem with this Lrepack Topaz Photo AI 1.5.2 version, I can now with 100% certainty conclude that the Lrepacks here are all defective and the herein included 4.2 GB bin [model] files either do not get installed or do not work.
      
      I found on another site a version 1.5.2 that, like version 1.4.0 I had found elsewhere which successfully utilized GPUs, installed in the same way and ended up performing superbly utilizing GPU's.
      
      The downloadable file size of that version 1.5.2 I found there is around 700 MB. The installation process took about 1/2 an hour downloading about 4+ GB of 31 different *.TZ model files.
      Upon completion of the installation and activation, the same 4K image as previously mentioned processed again within less than 10 seconds with full GPU load, temperatures going as high as 80°C, fans roaring like an airliner on takeoff!
      Saving was also very swift with considerable GPU loads. The enhanced, denoised and sharpened image result was superb, better than version 1.4.0. did.
      This confirms to me 100% that the Topaz photo AI repacks here are all defective!
      1. 

           Главные редакторы

          Автор: LR.Support

         25.08.2023 01:16  

         Maybe it's in the loaded models.
         If you want to help, you can compare the models with which your program loads the GPU with the models from the repack.
         Do they replace each other or complement each other? How repack works with models loaded in your system.
         To create a repack, the original installer is used, which loads the models during installation. BUT! This is done in a system WITHOUT a video card (with a built-in graphics core in the processor).
         Perhaps this is the cause of the problem.
         1. 

              Постояльцы

             Автор: Dorcom

            30.08.2023 18:43  

            I can certainly try to help when I find the time.
            From what I have seen, the original installer file is usually much smaller around 450-700 megabytes and then in the install process starts downloading the models which in my last install with version 1.5.3 obtained from another site it downloaded 92 TZ model files over 8 gigabyte total taking some 30 to 40 minutes on a 300 MB/s connection.
            
            When I have time, what I will do is I will make an install comparison in a virtual machine installing your repack vs. the other.
            1. 

                 Главные редакторы

                Автор: LR.Support

               30.08.2023 19:22  

               Have you tried just setting the GPU for processing in the settings (not auto)?
               
               The original installer downloads 64 models in my case.
               You can use your uploaded models and repack without models (models didn't change in 1.5.x versions).
   4. 

        Постояльцы

       Автор: Dorcom

      23.08.2023 20:58  

      I will see what version 1.52 will do, if it uses the GPU or not. All the preceding versions did not, except for one version 1.40.
      The version 1.40, which I might have got from another side, did not have any models included and was about a 450 MB file size to download. During the install it started to download the models. Thus the install itself, because of the multiple downloads, took almost 1/2 an hour at 200 Mbps, due to the multiple downloads of various models.
      version 1.40 is the version that works taking full advantage in using fully GPU's!
      The problem of many versions not using GPU's is not isolated to me or my equipment as there are plenty of such questions and complaints about it if you search "Topaz photo AI not using GPU"!
   5. 

        Постояльцы

       Автор: Dorcom

      23.08.2023 20:32  

      Цитата: DesertFox

      Quite obviously your problem is your own and not that of the assembly or program. Try consulting the system requirements from the Topaz Labs website. My educated guess is that your computer falls short of meeting them! Additionally you could try updating your graphics card driver, and/or replace it with one that actually meets the necessary requirements.

      
      your comment is presumptuous best because you don't know what Intel I-9 I have and what Nvidia GTX TI I have!
      I think it's more likely that these hacks are flawed because I have tried installer than other systems would lower and higher CPU and performance rating and it replicates the same issue. Version 1.4 uses GPUs whereas the aforementioned versions thereafter do not.
      lastly, if it were my system then explain why so many other people experience the same issue!
      
      Do a search "Topaz photo AI GPU mode often does not work" and see how many people experience the same problem with various versions.
      
      

      Цитата: DesertFox

      #28

      
      PS read my post #28
   6. 

        Постояльцы

       Автор: Dorcom

      16.08.2023 08:01  

      To often x64 GPU mode does not work!
      1.51 has same problem. Lame. Takes forever.
      1.41, 1.42 and now 1.51 snail speed no GPU use, graphics cards fan roar up and the card monitor show near 5% GPU load no temperature rise, stays at 27C.
      Last version GPU mode worked was 1.40
      1.40 Zips through with lightening speed and I can tell as my graphics cards fan roar up and the card monitor show near 100% GPU load, temperature rises too to almost 80 C.
      1. 

           Постояльцы

          Автор: DesertFox

         20.08.2023 13:29  

         Quite obviously your problem is your own and not that of the assembly or program. Try consulting the system requirements from the Topaz Labs website. My educated guess is that your computer falls short of meeting them! Additionally you could try updating your graphics card driver, and/or replace it with one that actually meets the necessary requirements.
   7. 

        Постояльцы

       Автор: asics10

      8.08.2023 20:32  

      С Uploadrar не скачать пишет Скорее всего, эта проблема связана с самим веб-сайтом, и вы ничего не сможете с этим сделать. Вы можете сообщить администратору веб-сайта об этой проблеме.
      1. 

           Главные редакторы

          Автор: LR.Support

         8.08.2023 23:27  

         Там сертификат просрочен у сервера на котором файл. Браузер должен предлагать добавить его в исключения. Сделайте и качайте. Больше сотни людей так уже поступили.
      2. 

           Постояльцы

          Автор: miriness

         9.08.2023 00:20  

         Здесь же можно взять Даундоуд Мастер. И никаких проблем с АплоудРар
      3. 

           Постояльцы

          Автор: foxdgv

         15.08.2023 20:33  

         Уже версию 1.5.2 сто лет в обед как пора выкладывать.
         1. 

              Главные редакторы

             Автор: LR.Support

            15.08.2023 22:42  

            Уже было в теме несколько раз, что beta версии программы неоднократно были с недостатками.
            Поэтому репаки ТОЛЬКО на финалки для Topaz'ов. А какая финальная смотрим тут. И то, что 1.5.2 за несколько дней так и не стала финалом, скорее в минус.
   8. 

        Постояльцы

       Автор: gsrd90

      28.07.2023 12:06  

      1.4.3 please
   9. 

        Меценат

       Автор: gaevka

      22.07.2023 00:57  

      Работает крайне медленно.
      Возможно в 1.4.2 будут изменения
   10. 

         Постояльцы

        Автор: Dorcom

       21.07.2023 20:11  

       About a few weeks ago in June I installed Topaz Photo AI 1.4.0. the 4th or 5th iteration starting out with 1.2.
       For the first time I experienced blazing fast performance and processing speed. So fast that I in the beginning refused to believe it! Everything almost instantaneously in just a few seconds!
       Quite obvious to me, this version fully utilized all my Nvidia GPU cores.
       
       Last week I upgraded to version 1.4.1 and much to my disappointment I had the same before experienced slow performance again.
       I have read on other sites user comments about that many versions do not utilize the GPU core for processing despite being set to do so. So I uninstalled version 1.4.1 and reinstalled version 1.4.0. and with that had again the blazing fast Topaz photo AI!
       
       It is to note that the 1.4.0 version I reinstalled has a small installer EXE off about only 455 MB as it during the install process downloads all the models. The install process takes almost a 1/2 hour as it downloads all models, more than 6 GB during the install. Compared to all the previous versions including the most recent 1.4.1. Other ones are typically around 4 GB install file size and apparently have the models included. The superfast X64 1.4.0 version I found at a competing site named cybermania.
       
       (Гугл-перевод)
       Примерно несколько недель назад в июне я установил Topaz Photo AI 1.4.0. 4-я или 5-я итерация, начиная с 1.2.
       Впервые я испытал молниеносную производительность и скорость обработки. Настолько быстро, что я вначале отказывался в это верить! Все практически мгновенно всего за несколько секунд!
       Для меня совершенно очевидно, что эта версия полностью использовала все ядра графического процессора Nvidia.
       
       На прошлой неделе я обновился до версии 1.4.1, и, к моему большому разочарованию, у меня было то же самое, прежде чем снова столкнуться с низкой производительностью.
       Я читал на других сайтах комментарии пользователей о том, что многие версии не используют ядро графического процессора для обработки, несмотря на то, что они настроены на это. Поэтому я удалил версию 1.4.1 и переустановил версию 1.4.0. и с этим снова сверкающий быстрый Топаз фото AI!
       
       Следует отметить, что версия 1.4.0, которую я переустановил, имеет небольшой установочный файл EXE размером всего 455 МБ, так как в процессе установки загружаются все модели. Процесс установки занимает почти 1/2 часа, так как загружаются все модели, более 6 ГБ во время установки. По сравнению со всеми предыдущими версиями, включая самую последнюю 1.4.1. Другие обычно имеют размер установочного файла около 4 ГБ и, по-видимому, включают модели. Сверхбыструю версию X64 1.4.0 я нашел на конкурирующем сайте под названием Cybermania.
   11. 

         Постояльцы

        Автор: AGraff

       15.07.2023 05:54  

       В тексте есть ссылка на версию 1.3.3, которая никуда не ведёт. Пробовал Яндекс и Турбобит - нет такого файла.
   12. 

         Постояльцы

        Автор: DrJayZi

       4.07.2023 22:59  

       Откуда 13 версия взялась? На оф сайте в разделе скачиваний 12 версия.
       1. 

            Главные редакторы

           Автор: LR.Support

          4.07.2023 23:41  

          С официального сайта - линк. А циферку на странице загрузки видимо на днях обновят.
          Она вышла вслед за 1.3.12 сразу 29-го ещё. Хотя может и пересоберут с новой ЦП, как уже бывало.